STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| Product Name: | Feeder Calibration Jig Relay PC Board |
| Part Number: | N610012654AA |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The N610012654AA feeder calibration jig PC board is an original-new electronic control component developed for use inside compatible SMT feeder calibration equipment. It is commonly identified as a relay or I/O interface board responsible for transferring electrical commands between the jig controller, feeder connection mechanism, sensors, switches, and related operating components.
A properly functioning calibration board is essential when maintenance technicians inspect feeder pitch accuracy, component pickup position, tape indexing, sprocket movement, sensor response, and mechanical alignment. When the existing board develops relay failure, damaged connectors, unstable output signals, oxidized terminals, or intermittent communication, the calibration jig may become unreliable or completely inoperative.
Replacing the faulty board with the correctly identified N610012654AA PC board can help restore stable jig operation and improve the consistency of feeder inspection and maintenance. It is suitable for SMT factories, feeder repair workshops, equipment service companies, contract manufacturers, and spare-parts distributors serving customers in Europe, North America, and Southeast Asia.
| Item | Information |
| Product | Feeder Calibration Jig Relay PC Board |
| Part Number | N610012654AA |
| Condition | Original New |
| Component Type | Industrial Relay and I/O PCB |
| Equipment Type | SMT Feeder Calibration Jig |
| Primary Purpose | Feeder testing, adjustment, and calibration control |
| Installation Method | Direct replacement after compatibility confirmation |
| Recommended Buyer | SMT Factory, Repair Center, Distributor, or Service Provider |
| Order Requirement | Confirm part number and board appearance before purchase |
A feeder calibration jig operates in a workshop environment where it may be used repeatedly throughout the day. Each testing cycle requires the control board to receive commands, switch electrical circuits, detect input signals, and communicate with connected feeder mechanisms.
Over time, the board can experience electrical, environmental, or mechanical problems.
Frequent switching can gradually wear internal relay contacts. Worn contacts may create unstable output, delayed response, or complete loss of a control channel.
Repeated cable removal, incorrect insertion, or side pressure can bend connector pins, loosen solder joints, or damage plastic connector housings.
Electronic components on the PCB may be damaged if technicians handle the board without an antistatic wrist strap, grounded workbench, or suitable ESD packaging.
Dust, flux residue, metal particles, oil, and moisture can accumulate on the board surface and affect insulation, terminals, relay operation, or signal stability.
Unstable voltage, reverse connection, short circuits, or power-supply failure may damage protective components, relay circuits, or control interfaces.
Capacitors, relays, connectors, and solder joints may deteriorate after extended operation, especially when the calibration jig is used in a warm or poorly ventilated area.
Replacing relays or components without the correct specification may create further faults. Excessive soldering temperature can also damage PCB tracks and through-hole connections.
| Failure Symptom | Possible Board-Related Cause |
| Calibration jig does not power up correctly | Power input, fuse, connector, or PCB circuit failure |
| Feeder does not index during testing | Relay output or control signal interruption |
| Sensor input is not detected | Input circuit, connector, cable, or sensor interface problem |
| Intermittent jig operation | Loose connector, cracked solder joint, or aging relay |
| One calibration function does not respond | Individual relay or output-channel failure |
| Feeder advances irregularly | Unstable command signal or external mechanical problem |
| Error appears after cable movement | Damaged cable, connector pin, or PCB solder joint |
| Board becomes unusually hot | Short circuit, incorrect voltage, or component failure |
| Replacement board cannot be installed | Incorrect part number, revision, connector, or mounting layout |
These symptoms are provided for troubleshooting reference. A complete diagnosis should also include the jig power supply, wiring harness, sensor system, feeder connector, mechanical fixture, and operating software.
When testing confirms that the original calibration-jig PCB is defective, replacing it with the correctly identified N610012654AA relay PC board provides a practical repair solution.
A correct replacement can help:
The replacement board should match the original unit in part number, connector type, component layout, mounting-hole position, and PCB revision whenever applicable.
| Specification | Description |
| Manufacturer Reference | Panasonic |
| Part Number | N610012654AA |
| Standard Product Name | Feeder Calibration Jig Relay PC Board |
| Alternative Description | Feeder Jig I/O PCB or Relay Control Board |
| Product Condition | Original New |
| Board Category | Industrial Equipment Control PCB |
| Application | Compatible SMT Feeder Calibration Jig |
| Control Function | Relay switching and signal interfacing |
| Input Function | Receives commands or sensor-related signals |
| Output Function | Transfers control signals to connected jig components |
| Material | Electronic components assembled on printed circuit board |
| Connector Type | According to the original board configuration |
| Mounting Type | Internal fixed installation |
| Electrical Rating | Must follow the original calibration-jig specification |
| Software Requirement | Determined by the complete jig control system |
| Installation Skill | Professional SMT equipment maintenance recommended |
| ESD Requirement | Antistatic handling required |
| Product Status | Replacement Spare Part |
| Packaging | Antistatic and impact-resistant export packaging |
| Quantity | Available from one piece, subject to stock confirmation |
The following part numbers may appear in related feeder-board or feeder-control applications. They must not be treated as automatic substitutes for N610012654AA.
| Part Number | Common Market Description | Typical Application Reference | Substitution Guidance |
| N610012654AA | Relay or I/O PC Board | Feeder calibration jig | Target product; confirm complete board label |
| N610012673AA | NF3AC-Series PC Board | CM402 or CM602 feeder cart system | Not a direct substitute without technical confirmation |
| N610108741AA | NF3ACD Feeder Cart Board | CM402 or CM602 feeder cart | Compare connectors, revision, and machine configuration |
| N610012674AA/AB | Multi-Slot Feeder Board | Feeder cart or feeder interface system | Different application may apply |
| KXFE000HA00 | NF3ACA-Related Board | Feeder cart control application | Verify part number and board code |
| N610012675AA | Related Industrial Control Board | Machine-dependent board position | Confirm through the original parts manual |
| N610030275AA | Related Feeder-System Board | Equipment-specific control system | Do not order by appearance alone |
Part numbers that look similar may use different firmware, connector definitions, slot quantities, relay configurations, or communication functions. Always use the original equipment documentation or board label as the primary identification reference.
The N610012654AA PC board is intended for professional feeder calibration and maintenance environments.
Production plants use feeder calibration jigs to inspect feeders before they return to the SMT line. A reliable calibration board helps maintenance personnel identify feeding errors before they cause placement defects.
Repair workshops may test dozens of feeders with different widths and configurations. Stable jig control is important for repetitive inspection, adjustment, and functional verification.
EMS factories can use calibrated feeders to reduce pickup errors, missing components, tape-position problems, and unexpected machine stoppages.
Internal maintenance teams use calibration equipment to support preventive maintenance programs and reduce dependence on external repair services.
Distributors can supply the N610012654AA board as a specialized replacement item for customers repairing compatible feeder calibration equipment.
Training departments may use feeder calibration jigs to demonstrate feeder operation, mechanical adjustment, sensor checking, and maintenance procedures.
| Calibration Task | Purpose |
| Feeder pitch verification | Confirms that the tape advances by the required distance |
| Pickup-position checking | Checks whether the component pocket reaches the correct pickup point |
| Sprocket alignment | Verifies engagement between sprocket teeth and carrier-tape holes |
| Tape-guide inspection | Confirms stable tape guidance and cover-tape movement |
| Sensor-response testing | Checks feeder or jig sensor operation |
| Indexing consistency test | Evaluates repeated feeding accuracy |
| Mechanical alignment | Supports adjustment of feeder guides and positioning components |
| Functional confirmation | Verifies that the repaired feeder operates before production use |
The N610012654AA board functions as part of the feeder calibration jig's electrical control system.
The technician activates a control button, switch, or programmed test function on the feeder calibration jig.
The jig controller transfers the command to the relay or I/O board through the connected wiring harness.
The appropriate relay circuit changes its electrical state according to the command received from the jig control system.
The board sends or switches the required signal to the feeder interface, motor circuit, solenoid, sensor circuit, or other connected component.
The technician observes tape movement, sprocket indexing, pickup position, sensor status, or alignment through the jig's camera, reference cursor, display, or mechanical scale.
If the feeder position is outside the required range, the technician adjusts the relevant guide, sprocket, pitch mechanism, sensor, or positioning component.
The feeder is operated through several cycles to confirm stable and repeatable performance before it is returned to the production line.
The complete N610012654AA number is provided clearly to support accurate procurement and warehouse management.
The board is offered as an original-new replacement component for customers requiring dependable industrial equipment parts.
Keeping a replacement calibration-jig board in stock can help maintenance teams respond quickly when the existing PCB fails.
Professional packaging and flexible international shipping arrangements support customers in Europe, North America, Southeast Asia, and other regions.
One-piece purchasing is suitable for repair requirements, emergency replacement, testing, or spare-parts inventory.
Buyers can provide board photographs and equipment information for pre-order comparison, helping reduce purchasing errors.
Every board should be inspected according to the agreed order requirements.
| Inspection Item | Inspection Content |
| Part-Number Check | Confirm N610012654AA identification |
| Label Check | Inspect printed and attached identification labels |
| PCB Surface | Check for scratches, cracks, contamination, or corrosion |
| Electronic Components | Inspect relays, capacitors, resistors, and other visible parts |
| Connector Condition | Check pin alignment and housing condition |
| Mounting Points | Confirm that mounting holes are not damaged |
| Solder Condition | Inspect visible solder joints and repaired areas |
| Packaging Condition | Confirm antistatic and impact-resistant protection |
| Photo Confirmation | Available according to the agreed order procedure |
| Functional Testing | Subject to testing equipment and sales agreement |
Electronic control boards require careful handling throughout storage and transportation.
Special packaging, combined shipment, customer labels, or neutral cartons can be discussed before order confirmation.
Installation should be performed only by trained maintenance personnel.
| Maintenance Action | Recommended Purpose |
| Keep the board dry | Prevent corrosion and leakage current |
| Use ESD protection | Protect sensitive electronic components |
| Clean the jig regularly | Reduce dust and metal-particle contamination |
| Inspect connectors | Detect loose, bent, or oxidized terminals |
| Check the power supply | Prevent damage from unstable voltage |
| Avoid unauthorized repair | Reduce incorrect component replacement |
| Keep a spare board | Reduce downtime during unexpected failure |
| Record board revisions | Improve future replacement accuracy |
| Test feeders periodically | Maintain stable feeder performance |
| Store in antistatic packaging | Protect unused inventory |
Selecting the correct replacement board requires more than matching the general equipment name.
The required number should be N610012654AA. Do not rely only on the first digits or a shortened code.
Compare every printed number, sticker, revision mark, and board code shown on the original board.
Confirm the number, position, shape, pin count, and direction of all connectors.
Relay quantities, fuse positions, terminal blocks, capacitors, and other visible components should match the original configuration.
Provide the complete calibration-jig model and equipment serial information whenever available.
Compare the board shape, mounting holes, brackets, and available installation space.
Confirm that the board is actually defective. Similar symptoms may be caused by cables, sensors, switches, power supplies, motors, mechanical jams, or software settings.
Photographs should include:
To receive an accurate quotation, please provide the following information:
| Required Information | Example |
| Part Number | N610012654AA |
| Product Name | Feeder Calibration Jig PC Board |
| Required Quantity | 1 Piece, 2 Pieces, or More |
| Current Board Photos | Front, Rear, Label, and Connectors |
| Calibration Jig Model | Complete Model Information |
| Equipment Serial Number | When Available |
| Product Condition Required | Original New |
| Destination Country | Shipping Country and Postal Code |
| Shipping Method | Express, Air Freight, or Appointed Forwarder |
| Delivery Requirement | Standard or Urgent |
| Packaging Requirement | Standard, Neutral, or Customized |
| Import Documents | Invoice, Packing List, or Other Documents |
Providing complete information at the beginning can shorten confirmation time and reduce compatibility risks.
Feeders directly influence component presentation and pickup stability. A feeder that advances too far, advances insufficiently, positions the tape incorrectly, or operates inconsistently may cause production problems.
Potential results include:
A reliable feeder calibration jig supports preventive feeder maintenance. The N610012654AA board is one of the electronic components that can help the jig perform its intended control and testing functions.
Ordering only according to appearance is not recommended. Several industrial control boards may look similar but use different circuits, connectors, firmware, or relay configurations. Confirm the complete part number and original-board label before purchasing.
The board works as part of the complete jig control system. It may switch relay outputs, transfer I/O signals, and connect control commands with sensors or actuators. Exact functions depend on the jig configuration.
A direct replacement normally requires matching hardware and system configuration. However, software, firmware, DIP-switch settings, or wiring differences may exist. Installation should follow the original equipment manual and qualified maintenance procedure.
Different revisions may have changes in components, connectors, firmware, or circuit design. Do not assume interchangeability. Send photographs of both boards and confirm technical compatibility before installation or power-on testing.
Related boards, cables, sensors, switches, power components, feeder fixtures, calibration accessories, and SMT feeder spare parts may be supplied according to the requested part number, equipment model, photograph, and availability.
Provide the part number, quantity, equipment model, photographs, and shipping destination.
The supplied information is compared with the available board identification, connector layout, and product condition.
The quotation can include unit price, product condition, availability, delivery terms, packaging method, and shipping options.
Confirm the product information, payment terms, shipping address, and required documents.
The board is inspected and packed using antistatic and impact-resistant materials.
Shipment can be arranged by international express, air freight, or the buyer's appointed logistics provider.
Shipment information and related export documents are provided according to the agreed order terms.
Looking for the N610012654AA feeder calibration jig relay PC board or other SMT feeder maintenance parts?
Please send us:
Our sales team will review your request and provide a suitable quotation, availability information, compatibility guidance, packaging details, and international delivery options.
Send your inquiry today for accurate part confirmation and professional SMT spare-parts support.
The manufacturer name and equipment model references in this description are used only to identify product compatibility and application. Compatibility must be confirmed through the complete part number, original PCB label, connector configuration, equipment manual, and actual machine setup before purchase and installation.
){kind=link}